COLLECTOR OF CENTRAL EXCISE, 'BANGALORE versus M/S. ESCORTS MAHLE LTD.

ARUN KUMAR, J. These appeals are directed against the Karnataka High Court while answering a Reference 35(G) of the Central Excise and Salt Act, 1944. The question purpose is reproduced as under:

p. 1206, margin E

"Whether on the facts and in the circumstances appellate Tribunal is right in law in holding that the eligible to MODY AT Credit in respect of Ramming and filter mesh used in or In relation to the manufacture the ground that they are covered under Proviso Central Excise Rules."

p. 1206, margin F

In order to appreciate the controversy, the relevant assessees claimed benefit of MODY AT Credit in respect of Fibre glass and filter mesh. These items are used in the process of steel and without the use of these item,s the end product The assessees in these cases are engaged in the manufacture like pistons in the Escort's case. The nianufacture takes place in electric arc furance refractories. It is submitted on behalf of the assesses th~t during the course of manufacture steel is melted at a very high temperature. Steel produces acidic vapours when melted at such a high temperature. To contain the vapour and neutralise them chemicals like dolomite or magnesite are used during the course of manufacturing process. Ramming Mass, fibre glass and filter mesh are processes in which chemicals are used to line the furances to neutralise the effect of acidic vapours produced during the course of melting steel. Unless these chemicals are used, the furance may burst. Accordingly, it submitted on behalf of the assesses that the~e chemicals being necessary inputs in the process of manufacture of steel items, MODY AT Credit has be allowed on them.

pp. 1206–1207, margin G

In respect of this contention that it is necessary to use such processes like Ramming Mass, the learned counsel. appearing for the assessees drew our attention to a book titled as "Electric Furance Steel Making (American Institute of Mining)" wherein while dealing with electric arc furance refractories, it is stated on page 157 as under:

p. 1207, margin C

"It is well know that much of steel making and refining is concerned not only with the removal of carbon to steel chemistry ranges but also with the removal of phosphorus and sulfur to appropriately low values. Since phosphorus and sulfur are chemically acidic materials, their removal from the melt is effected by combining them with the basic material lime (CaO) which holds them in the slag. However, for the lime to function in this role it must be allowed to react with the sulfur or phosphours in the melt and not with the silica from the refractoriesa more acidic material than phosphorus or sulfur, Accordingly a basic refractory-lined container (of dolomite or magnesite) is provided allow the removal of the undersirable phosphorus and sulfur from the melt to the slag without excessive corrosion of the refractory lining."

p. 1207, margin D

Keeping the aforesaid manufacutring process in view and also bearing in mind that it is essential to control the acidic vapours generated during the steel manufacturing process, this Bench has held in C.A.No. 6615/2003 Collector of Central Excise v. Steel Authority of India Limited that use such chemicals is essential for the manufacturir.g process. Specifically, it was observed that:

p. 1207, margin E

"As discussed by the concerned authority burnt dolamite is used so as to neutralize the acid which is formed at the time A manufacturing steel. This burnt dolamtie is, therefore, used in relation to manufacturing of the final product. It has been rightly pointed out that respondent is using burnt dolamite in relation to manufacture of final product so that it may combine with acid which is formed at the time of manufacture of the steel and neutralize the said acid so that

pp. 1207–1208, margin G

.... it may prevent damage to the furnace. But the used burnt dolamite is for neutralizing the acid form in the course of manufacture of steel. Hence, the judgment cannot be said to be, in any way, illegal or erroneous. The appeal is, therefore, dismissed. There shall be no

p. 1208

orders as to costs." C Manufacturing process being the same in these cases, we hold that the assesses are entitled to MODY AT Credit on Ramming Mass, Fibre glass and filter mesh.

p. 1208

The appeals are accordingly dismissed with no order are to costs. S.K.S. Appeals dismissed.

p. 1208

,_

p. 1208